GoldStar Prime 2
Specifications 

Interface:	ISA(AT) / IDE(AT)

Controls:	2 Floppy Drives (360KB, 720KB, 1.2MB, 1.44MB)
			2 Hard Drives
			2 Serial Ports
			1 Parallel Port
			1 Game Port


Connectors:
		CON1:	Serial Port 1
		CON2:	Serial Port 2
		CON3:	Parallel Port
		CON4:	Floppy Disk
		CON5:	IDE Disk
		CON6:	Game Port
		J13:	HD LED

Jumper Settings (J1-J12):
UP
DOWN
J1 Enable Floppy Support Disable Floppy Support
J2 Floppy Port Address (3F0-3F7) Floppy Port Address (370-377)
J3 Enable HD Controller Disable HD Controller
J4 Hard Disk Port Address (16-bit): 1F0-1F7, 3F6, 3F7 Hard Disk Port Address (16-bit): 170-177, 376, 377
J5 Hard Disk Port Address (8-bit): 320-323 Hard Disk Port Address (8-bit): 324-327
J6 ISA Connector Width=16-bit Slot ISA Connector Width=8-bit Slot
J7 Serial 1 Enabled Serial 1 Disabled
J8 Serial Port 1 Address - 3F8-3FF (COM1) Serial Port 1 Address - 3E8-3EF (COM3)
J9 Serial 2 Enabled Serial 2 Disabled
J10 Serial Port 2 Address - 2F8-2FF (COM2) Serial Port 2 Address - 2E8-2EF (COM4)
J11 LPT Port Enabled LPT Port Disabled
J12 LPT Port Address=378-37F (LPT1) LPT Port Address=278-27F (LPT2)


My sincere thanks to F. Robert Falbo, author of TheRef(tm) Web Site, for this information.
Visit TheRef, the ultimate resource for drives & controllers available on the net!